5
01/2008 Parameters operating area
5.3 Tool management
5
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 5-197
Symbols
/
The G56 reset value is TOWWCS
/ and
$SC_WEAR_TRANSFORM is set.
The current tool for channel "REV2" is indicated in row 6.
The current value of G56 on channel "REV2" is the same as the reset
value (
).
Row 15 displays the current tool for channel "HAND". Here, the
current value of G56 deviates from the G56 reset value (
).
Additional information
Additional information can be found in:
Function Manual Tool Management
To Next Page
Loading...
