Siemens SINUMERIK 840Di sl - Page 405

8
01/2008 Diagnostics operating area
8.4 Service displays
8
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition 8-405
Function
"SI communication"
softkey
Using this softkey, you can select the display of the Safety Integrated
communication: The dialog box "SI communication (general)"
indicates the communication data for sending (F_SENDDP) and
receiving (F_RECVDP) in a tabular form.
SI communication
(Example: SINUMERIK
solution line)
Signals
The following signals and values are displayed in this dialog box:
• Parameterized CPU-CPU communication clock cycle status
• Actual CPU-CPU communication clock cycle status
• Maximum CPU-CPU communication clock cycle
• Number of active send data connections (F_SENDDP)
• Number of active receive data connections (F_RECVDP)
Vertical softkeys:
“General” softkey
Displays the “SI communication (general)” dialog box.
“Send connection”
softkey
This means that you change to the “SI communication (send)” dialog
box.
“Receive connection”
softkey
This means that you change to the “SI communication (receive)”
dialog box.