8
Diagnostics operating area 01/2008
8.4 Service displays
8
© Siemens AG 2008 All rights reserved.
8-406 SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Function
“Send connection”
softkey
The “SI communication (send)” dialog box contains a list of the
configuration in tabular form and the status of F_SENDDP.
Signals
The following signals of the selected connection (in this case, e.g.
NCU710) are displayed in this dialog box:
• CPU-CPU communication ID
• Logical base address
• Connection number
• Parameterized maximum permissible communication time
• Actual communication time
• Maximum communication time
• Error reaction
Error reactions that can be set:
[0] "Alarm 27350 + STOP D/E"
[1] "Alarm 27350"
[2] "Alarm 27351 (self-clearing)"
[3] "No response from the system"
• Errors
• Diagnostics error code
• Replacement values active
• Actual communication data
To Next Page
Loading...
