Hydro:Evolved User Manual
Page 128 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
From the DO ON DOOR OPEN menu, scroll and select ON to enable the doors to open.
Figure 205: DO ON DOOR OPEN Menu
Scroll right and press Save.
14.14 Disable on CT Stop
Door outputs are disabled when the top CT Stop switch is enabled.
The following procedure describes how to disable all door outputs.
Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
From the DOORS menu, scroll and select Disable On CT Stop.
Figure 206: DOORS Menu – Disable On CT Stop
From the DISABLE DOOR ON CT STOP menu, scroll and select ON to disable all door
outputs.
Figure 207: DISABLE DOOR ON CT STOP Menu
Scroll right and press Save.
14.15 Disable on HA
Door outputs are disabled when the hoistway access is active.
The following procedure describes how to disable all door outputs.
Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
To Next Page
Loading...
Need help?
General
