Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 231
From the DEFAULT I/O? menu, select if restoring original inputs and outputs.
Figure 419: DEFAULT I/O? Menu
From the DEFAULT I/O? menu, select Yes to default I/O.
NOTE: If not defaulting I/O, select NO to back out.
The system automatically defaults all parameters. See Figure 412.
When the system has completed defaulting all parameters, the DEFAULTING
PARAMETERS menu displays PARAMETERS DEFAULTED. See Figure 413.
27.13.5 Default Other
The user has the option of defaulting other parameters within the system back to the original
factory settings.
The following procedure describes how to default other parameters.
Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 57.
From the MISCELLANEOUS menu, scroll and select Default. Figure 409.
From the DEFAULT menu, scroll and select Default Other.
Figure 420: DEFAULT Menu – Default Other
From the DEFAULT Other? menu, scroll and select if defaulting other settings.
Figure 421: DEFAULT Other? Menu
From the DEFAULT OTHER? menu, select Yes to default other.
NOTE: If not defaulting other, select NO to back out.
The system automatically defaults all parameters. See Figure 412.
When the system has completed defaulting all parameters, the DEFAULTING
PARAMETERS menu displays PARAMETERS DEFAULTED. See Figure 413.
To Next Page
Loading...
Need help?
General
