Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 181
Navigate to Adjustments and adjust the up or down distance by increasing the time.
Increasing the time causes the car to slow down sooner which increases the slowdown
distance.
Figure 324: Down Distance Menu – Overshooting Adjustment
Figure 325: Up Distance Menu – Overshooting Adjustment
Scroll back to GENERATE THRESHOLDS AND DISTANCES and select YES. If YES is not
selected, new thresholds and slowdowns are not generated.
Figure 326: Generate Thresholds
18.4.7.2 Adjust Leveling Time
When weight is added to the car, it might take longer than normal (three to five seconds) for
the car to level. Decreasing the slowdown distance decreases the time it takes for the car to
level. The speed threshold to adjust is dependent upon the speed the car is traveling.
The following procedure describes how to resolve car steady state if leveling is longer:
Navigate to Adjustments and adjust the up or down distance by decreasing the time.
Decreasing the time causes the car to have a shorter slow down period which decreases
the slowdown distance.
Figure 327: Down Distance Menu – Steady State of Leveling Longer Adjustment
To Next Page
Loading...
Need help?
General
