Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 321
40.2 Logged Faults
All faults that have occurred are logged. The Logged Faults displays a history of the last 32
faults.
The following procedure describes how to view the list of logged faults.
Navigate to MAIN MENU | FAULTS | LOGGED. See Figure 52.
From the FAULT LOG menu, view the list of faults that have occurred.
Figure 646: FAULT LOG Menu
40.3 Cleared Faults
Cleared faults deletes the history of recorded faults.
The following procedure describes how to clear the log.
Navigate to MAIN MENU | FAULTS | CLEAR LOG. See Figure 52.
From the CLEAR FAULT LOG? menu, press the right button and select Yes.
Figure 647: CLEAR FAULT LOG? Menu
The table below lists the faults reported by software or hardware.
Table 56: Faults Reported by Software or Hardware
To Next Page
Loading...
Need help?
General
