Hydro:Evolved User Manual
Page 130 © 2022 Smartrise Engineering, Inc. All Rights Reserved October 2022
14.17 No Demand Doors Open
The No Demand Doors Open option allows the car doors to stay open while the car is idle.
The following procedure describes how to set the doors to remain open when the car is idle.
Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
From the DOORS menu, scroll and select No Demand Doors Open.
Figure 212: DOORS Menu – No Demand Doors Open
From the NO DEMAND DOORS OPEN menu, scroll and select ON to keep the doors open
while the car is idle.
Figure 213: NO DEMAND DOORS OPEN Menu
Scroll right and press Save.
14.18 Jumper Timer
The jumper timer detects if the GSW or door locks are still jumpered. When jumpers are
detected after a configured amount of time, a fault occurs. This time is added to a fixed 1.6
second timeout.
The following description describes how to set the time for verifying jumpers prior to a fault.
Navigate to MAIN MENU | SETUP | DOOR SETUP. See Figure 55.
From the DOORS menu, scroll and select Jumper Timer.
Figure 214: DOORS Menu – Jumper Timer
To Next Page
Loading...
Need help?
General
