Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 227
From the PAYMENT PASSCODE menu, enter the payment passcode.
NOTE: The passcode will be given after payment has been made.
Figure 406: PAYMENT PASSCODE Menu
Scroll right and press Save.
27.12 Direct Change Delay
The direct change delay is the time before a car begins looking at car calls or hall calls in the
opposite direction to allow for the passengers to enter car calls in the same direction the car
was traveling.
The following procedure describes how to set the direct change delay.
Navigate to MAIN MENU | SETUP | MISCELLANEOUS. See Figure 57.
From the MISCELLANEOUS menu, scroll and select Direct Change Delay.
Figure 407: MISCELLANEOUS Menu – Direct Change Delay
From the DIRECT CHANGE DELAY menu, set the delay time for the car to change
directions.
Figure 408: DIRECT CHANGE DELAY Menu
Scroll right and press Save.
27.13 Default
The default settings are the original settings within the controller.
To Next Page
Loading...
Need help?
General
