Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 273
31.5.3 Fire Overrides Ph1
The following procedure describes how to allow fire to override Phase 1 EMS operation.
Navigate to MAIN MENU | SETUP | EMS. See Figure 59.
From the EMS menu, scroll and select Fire Overrides Ph1.
Figure 521: EMS Menu – Fire Overrides Ph1
From the FIRE OVERRIDES PH1 menu, scroll and select if a fire override phase 1 EMS
operation.
Figure 522: FIRE OVERRIDES PH1 Menu
Scroll right and press Save.
31.5.4 Ph1 Exit Delay
Phase 1 exit delay is the time a car remains in EMS Phase 1 (due to an emergency medical hall
call) prior to returning to normal operation.
The following procedure describes how to set the time a car returns to normal operation from
EMS Phase 1.
Navigate to MAIN MENU | SETUP | EMS. See Figure 59.
From the EMS menu, scroll and select Ph1 Exit Delay.
Figure 523: EMS Menu – Ph1 Exit Delay
To Next Page
Loading...
Need help?
General
