Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 317
38.12.3 Floor to Floor
The following procedure describes how to set the car to stop at each floor.
Navigate to MAIN MENU | DEBUG | DEBUGRUNS. See Figure 66.
From the DEBUGRUNS menu, scroll and select Floor To Floor.
Figure 631: DEBUGRUNS Menu – Floor To Floor
From the FLOOR TO FLOOR menu, scroll and select if checking front or rear doors.
Figure 632: FLOOR TO FLOOR Menu – Front or Rear
From the FLOOR TO FLOOR (FRONT or REAR) menu, scroll and select if enabling the car
to stop at each floor with the doors that only open from the front or rear.
Figure 633: FLOOR TO FLOOR FRONT Menu
Figure 634: FLOOR TO FLOOR REAR Menu
Scroll right and press Save.
38.12.4 Random
Random calls are calls that are selected randomly. The random runs allow for the car to land at
various floors in an arbitrary pattern with the doors that open from the front or doors that
open from the rear.
To Next Page
Loading...
Need help?
General
