Hydro:Evolved User Manual
October 2022 © 2022 Smartrise Engineering, Inc. All Rights Reserved Page 61
Distance when the car starts slowing down on a normal
run while moving in down direction
Sets the time to check the battery board
Sets the time to trigger Jack Resync
Sets the distance to prevent car from hitting the buffer
Enables soft starter board
Enables primary soft starter
Enables secondary soft starter
When set to ON, if two soft starters are supported, and
only one of those soft starters is faulted, the car will still
be allowed to run.
Sets the primary soft starter time to ramp up to V-Max
Sets the primary soft starter percentage of input AC
voltage used for ramp up
Sets the primary soft starter overcurrent limit in amps
Sets the primary soft starter over temperature limit in
degrees Fahrenheit counts
Enables secondary soft starter
Sets the secondary soft starter time to ramp up to V-
Max
Sets the secondary soft starter percentage of input AC
voltage used for ramp up
Sets the secondary soft starter overcurrent limit in
amps
Sets the secondary soft starter over temperature limit
in degrees Fahrenheit counts
Adjust speed when transitioning from contract speed to
leveling speed in the up direction
Adjust speed when transitioning from contract speed to
leveling speed in the down direction
Generate Thresholds and Distance
Updates threshold and slowdown distances based on
adjustment settings
Code that gives access to front door car calls
Code that gives access to rear door car calls
Time for registering a car call after access code is
entered
To Next Page
Loading...
Need help?
General
