Safety information regarding elec-
trostatic charge
DANGER
Risk of explosion due to static charge!
– Always wear an antistatic protection
suit when working in a potentially ex-
plosive area.
This seat is covered in electrically con-
ductive material. This material is electri-
cally bonded to the truck earth.
– Do not put any additional covers, e.g.
blankets or furs, on the seat.
Adjusting the driver's seat and arm-
rest
Adjusting the driver's seat and armrest is one
of the checks and tasks that must be per-
formed before daily use. The truck can only be
operated safely when the seat position is cor-
rect.
– Refer to the following chapter entitled "Driv-
er's seat".
Adjusting the steering column
– Pull up and hold the lever (2) for steering
column adjustment.
– Position the steering column (1), then push
the lever down again and allow the steering
column to engage.
DANGER
Risk of accident!
– Ensure that the steering column is positioned se-
curely.
The steering column must click into place.
Never adjust the steering column while driving.
6219_003-012_V2
1
2
Operation
4
Checks and tasks before daily use
9956368011531 EN - 01/2021 - 05
To Next Page
Loading...
