Cruise control (variant)
The "cruise control" assistance function allows
the driver to maintain a constant truck speed
over a reasonable distance. In addition, the
cruise control function can be used to comply
with any speed restriction that is in force on
the company's premises. The cruise control
function operates when driving forwards at a
speed of 6 km/h or faster. The function is put
on standby via the display-operating unit and
can be activated and deactivated using the
drive direction switch on the operating device
for the hydraulic functions.
When the cruise control function is activated,
the driver can save the speed when driving
forwards at a speed of at least 6.0 km/h by
pressing a button and can continue driving
without actuating the accelerator pedal.
The pictogram
(3) for operating the cruise
control function is located on the operating de-
vice for the hydraulic functions.
Putting the cruise control function on
standby
In order for the cruise control function to be
activated via the drive direction switch, the
function must first be put on standby using the
display-operating unit.
– Press the
button.
The first menu level appears.
– Press the "Drive" softkey
.
The "Drive" menu appears.
6219_003-305
Operation
4
Driving
220 56368011531 EN - 01/2021 - 05
To Next Page
Loading...
