Maintenance - 1000 hours/annually
At operating hours
1000
2000
4000
5000
7000
8000
10000
11000
13000
14000
Carried
out
Chassis, bodywork and fittings
Check the chassis for cracks.
Check the overhead guard/cab and panes of glass for damage.
Check that the cab door sensor is working correctly and check for damage.
Check the controls, switches and joints for damage, and apply grease and oil.
Check that the driver's seat is working correctly and check for damage.
Check that the driver restraint system is working correctly and check for damage,
and clean.
Check the signal horn.
Variant
: Check the dual-pedal variant for damage and that it is working correctly,
and lubricate.
Battery compartment
Check that the battery door, and the sensor if necessary, is working correctly and
check for damage.
Check the battery lock for damage.
Grease the battery door hinges.
Variant
: Check the oil level of the hydraulic battery carrier and check for leaks.
Check all moving parts for wear and lubricate them.
Wheels and tyres
Check tyres for wear and check the air pressure if necessary.
Check the wheels for damage and check the tightening torques.
Drive axle
Check the mounting, check for leaks and clean the cooling fins.
Check that the conductor rails between the power modules and the motor connec-
tions are mounted correctly.
Check the oil level in the drive wheel unit and the multi-disc brake.
Change the gearbox oil (once after the first 1000 hours).
Steering system
Check the steering system for leak tightness and check that the steering system is
working correctly.
Check that the steering wheel is securely attached and check the rotary handle for
damage.
Maintenance
5
General maintenance information
450 56368011531 EN - 01/2021 - 05
To Next Page
Loading...
