– Fasten the seat belt.
– Release the parking brake.
– Push the drive direction switch/drive direc-
tion selection lever in the desired drive di-
rection.
– Press the accelerator pedal.
– Drive the truck to a safe area and park the
truck safely.
– If the error occurs frequently, contact the
authorised service centre.
Emergency lowering
If the hydraulic controller fails whilst a load is
raised, emergency lowering can be performed.
An emergency lowering screw designed for
this purpose is located on the valve block.
DANGER
There is a risk to life from falling loads
or from truck components being low-
ered.
– Do not walk beneath the raised load.
– Adhere to the steps detailed below.
– Remove the lid (1) on the right-hand side of
the footwell panelling near the accelerator
pedal.
Operation
4
Procedure in emergencies
380 56368011531 EN - 01/2021 - 05
To Next Page
Loading...
