CAUTION
Installation and/or use of such products may there-
fore have a negative impact on the design features of
the truck and thus impair active and/or passive driv-
ing safety.
We recommend that you obtain approval from the
manufacturer and, if necessary, from the relevant
regulatory authorities before installing such parts.
The manufacturer accepts no liability for any damage
caused by the use of non-original parts and accesso-
ries without approval.
Damage, defects and misuse of
safety systems
Damage or other defects on the truck or at-
tachment must be reported to the supervisor
or responsible fleet manager immediately so
that they can have the defect rectified.
Trucks and attachments that are not functional
or safe to drive may not be used until they
have been properly repaired.
Do not remove or deactivate safety systems
and switches.
Fixed set values may only be changed with
the approval of the manufacturer.
Work on the electrical system (e.g. connecting
a radio, additional headlights etc.) is only per-
mitted with the manufacturer's written appro-
val. All electrical system interventions must be
documented.
Even if they are removable, roof panels may
not be removed, as they are designed to pro-
tect against small falling objects.
Safety
2
Basic principles for safe operation
4756368011531 EN - 01/2021 - 05
To Next Page
Loading...
