DANGER
Risk of accident from a falling load!
When transporting small items, attach a load safety
guard (variant) to prevent the load from falling on the
driver.
A closed roof covering (variant) should also be used.
Removable roof panels may not be removed.
Adjusting the fork
– Lift the locking lever (1) and move the fork
arms to the desired position.
– Allow the locking lever to snap back into
place.
The load centre of gravity must be midway be-
tween the fork arms.
– Only actuate the fork prong positioner (var-
iant) when the fork is not carrying a load.
Danger area
The danger area is the area in which people
are at risk due to the movements of the truck,
its working equipment, its load-carrying equip-
ment (e.g. attachments) or the load. Also in-
cluded are the areas where loads could fall or
working equipment could fall or be lowered.
DANGER
Risk of injury!
– Do not step on the fork.
DANGER
Risk of injury!
– Do not step under the raised forks.
1
6210_842-001
Operation
4
Handling loads
260 56368011531 EN - 01/2021 - 05
To Next Page
