Still 6219 - Climbing into and out of the Truck

Depending on the tyres used, the truck is
fitted with one or more antistatic belts (3)
and/or with a corona electrode (4). These
components ensure that the truck cannot
charge statically.
– Do not use the truck if there is any damage
or defects.
– In this case, contact your authorised service
centre.
Any other necessary tasks are summarised
under their own headings, e.g. adjusting the
driver's seat.
DANGER
Insufficient explosion protection carries
a risk of explosion!
If the explosion-protection components
are defective or no longer present, do
not operate the truck in potentially explo-
sive areas.
– Notify the authorised service centre.
Climbing into and out of the truck
WARNING
Risk of injury when climbing into and out of the truck
due to slipping, striking parts of the truck or becom-
ing stuck!
If the footwell cover is very dirty or smeared with oil,
there is a risk of slipping. There is a risk of hitting
your head on the overhead guard post or of your
clothes becoming stuck when climbing out of the
truck.
– Ensure that the footwell cover is not slippery.
– Do not jump into or out of the truck.
– Ensure that you have a secure grip on the truck.
3
4
Antistatic belt and corona electrode

Operation
4
Checks and tasks before daily use
9756368011531 EN - 01/2021 - 05