Still 6219 - Danger to Employees

Hazard Course of action Check note
√ done
- Not applicable
Notes
When operating driverless transport systems
Roadway quality inad-
equate
Clean/clear roadways O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Loading equipment in-
correct/slipped
Reposition load on pal-
let
O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Unpredictable driving
behaviour
Employee training O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Routes blocked Mark routes
Keep roadways clear
O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Routes intersect Announce right-of-way
rule
O German Ordinance on
Industrial Safety and
Health (BetrSichV)
No person detection
when placing goods in-
to stock and removing
goods from stock
Employee training O German Ordinance on
Industrial Safety and
Health (BetrSichV)
Danger to employees
According to the German Ordinance on Indus-
trial Safety and Health (BetrSichV) and labour
protection law (ArbSchG), the operating com-
pany must determine and assess hazards dur-
ing operation, and establish the labour protec-
tion measures required for employees (Betr-
SichVO). The operating company must there-
fore draw up appropriate operating instruc-
tions (§ 6 ArbSchG) and make them available
to the driver. A responsible person must be
appointed.
NOTE
Please observe the definition of the following
responsible persons: "operating company"
and "driver".
The construction and equipment of the truck
correspond to the Machinery Directive
2006/42/EC and are therefore marked with CE
labelling. These elements are therefore not
Safety
2
Residual risk
58 56368011531 EN - 01/2021 - 05