included in the hazard assessment. Attach-
ments possess their own CE labelling and
likewise are not included for that reason. The
operating company must, however, select the
type and equipment of the trucks so as to
comply with the local provisions for deploy-
ment.
The result must be documented (§ 6
ArbSchG). In the case of truck applications in-
volving similar hazard situations, the results
may be summarised. This overview (see
chapter "Overview of hazards and counter-
measures") provides help on complying with
this regulation. The overview specifies the
main hazards that are the most frequent
cause of accidents in the event of non-compli-
ance. If other major operational hazards are
involved, they must also be taken into consid-
eration.
The conditions of use for trucks are broadly
similar in many plants, so the hazards can be
summarised in one overview. Observe the in-
formation provided by the relevant employers'
liability insurance association on this subject.
Safety
2
Residual risk
5956368011531 EN - 01/2021 - 05
To Next Page
Loading...
