Still 6219 - Attachments; Fitting Attachments

Attachments
Fitting attachments
DANGER
Risk of explosion!
Working on a truck within potentially ex-
plosive areas can lead to explosions in
the surrounding atmosphere.
No work must be performed on the truck
in potentially explosive areas!
– Only assemble attachments outside
potentially explosive areas.
DANGER
Risk of explosion!
Working within potentially explosive
areas with attachments that do not com-
ply with explosion-protection regulations
can lead to explosions in the surround-
ing atmosphere!
– Only operate attachments that comply
with the explosion-protection regula-
tions.
– Check the area of application by com-
paring with the information on the
nameplate of the attachments.
– If the area of application is not clear,
ask the safety officer.
If the truck is equipped with an integrated at-
tachment (variant) at the factory, the specifica-
tions in the STILL operating instructions for in-
tegrated attachments must be observed.
If attachments are fitted at the place of use,
the specifications in the operating instructions
from the attachment manufacturer must be ob-
served.
If an attachment is not delivered together with
the truck, the specifications from the manufac-
turer and the operating instructions from the
attachment manufacturer must be observed.
Before initial commissioning, the function of
the attachment and the visibility from the driv-
er's position with and without a load must be
checked by a competent person. If the visibili-
ty is deemed insufficient, visual aids must be
Operation
4
Attachments
298 56368011531 EN - 01/2021 - 05