Lubricating the joints and controls
– Oil or grease bearings and joints according
to the "maintenance data table".
●
Driver's seat guide
●
Cab door hinges (variant)
●
Battery-door hinges or battery-cover hinges
●
Actuating rod (1) for valves (with multi-lever
operation)
Checking the battery interlock and
the battery door interlock
DANGER
A malfunction of the battery interlock and the bat-
tery door interlock can cause the battery door to
open and the battery could possibly fall out when
the truck is tilted or during sharp deceleration. If the
battery falls out, there is a danger of being crushed
to death.
– If the interlock is deformed, damaged or difficult to
move, inform the authorised service centre imme-
diately. Do not operate the truck.
– Check that the interlocks function correctly.
– The interlocks must be greased and must move
easily.
– Always check the interlock after an accident.
NOTE
The interval for greasing is influenced signifi-
cantly by the application conditions and the
environmental conditions affecting the truck.
Visual inspections and function checking of
the interlock must be carried out as required
and after every 1000 hours. Grease all moving
parts of the interlock as necessary.
– Open the battery door (1).
6210_606-030_V2
1
4
3
1
2
Maintenance
5
Preserving operational readiness
46156368011531 EN - 01/2021 - 05
To Next Page
Loading...
