At operating hours
1000
2000
4000
5000
7000
8000
10000
11000
13000
14000
Carried
out
Check that the steering axle is securely mounted, check for leaks and apply grease.
Check the steering stop.
Brake system
Check the condition of all mechanical brake parts and check that they are working
correctly.
Check the actuation distance of the brake pedal and adjust if necessary.
Check the manual force required to apply the handbrake and adjust if necessary.
Perform a brake test.
Electrical system
Check all power cable connections.
Check that the switches, transmitters and sensors are working correctly.
Check the lighting and indicator lights.
Cooling system (converter and drive axle)
Check that the fans and the air ducts are working correctly and check for damage.
Clean the fans and the air ducts.
Clean the cooling fins on the converter and the traction motors.
Battery and accessories
Check the lead-acid battery for damage and check the acid density; observe the
manufacturer's maintenance instructions.
Variant
: Replace the non-return valve on lead-acid batteries with electrolyte circula-
tion.
Variant
: Observe the manufacturer's maintenance instructions for lithium-ion batter-
ies.
Check the appliance plug and the truck harness for damage.
Check the battery male connector and the battery harness for damage.
On-board charger
Check all power cable connections between the OBC and the truck.
Check the components of the OBC for damage.
Check the charging cable and charger socket for damage.
Clean the fans and the air duct.
Hydraulics
Check the condition of the hydraulic system, check that it is working correctly and
check for leak tightness.
Maintenance
5
General maintenance information
45156368011531 EN - 01/2021 - 05
To Next Page
Loading...
