Adjusting the lumbar support (variant)
NOTE
The lumbar support can be adjusted to suit the
contours of the individual driver's spine. Ad-
justing the lumbar support moves a convex
support cushion into the upper or lower part of
the backrest.
– Turn the turning knob (6) up or down until
the lumbar support is in the required posi-
tion.
Adjusting the backrest extension (var-
iant)
– Adjust the backrest extension (7) by pulling
it out or pushing it into the desired position.
To remove the backrest extension, move it
past the end stop by firmly pushing it upwards.
6321_003-039_V3
6
6321_003-040_V3
7
Operation
4
Driver's seat
11356368011531 EN - 01/2021 - 05
To Next Page
