– Lift the fork carriage until the necessary
ground clearance is achieved.
– Tilt the lift mast backwards.
– Release the parking brake.
– Press the right accelerator pedal (1) for the
"forwards" drive direction and press the left
accelerator pedal (2) for the "backwards"
drive direction.
NOTE
In the dual pedal version, the drive direction
switches on the operating devices do not func-
tion.
The indicator for the selected drive direction
("forwards" (1) or "reverse" (2)) lights up on
the display-operating unit.
NOTE
Depending on the equipment, the following
variants of warning units for reverse travel
may be present:
●
An acoustic signal will be heard.
●
The STILL SafetyLight lights up.
●
The hazard warning system flashes.
The truck travels in the selected drive direc-
tion. The speed is controlled by the accelera-
tor pedal position. The truck brakes when the
accelerator pedal is released.
NOTE
The truck is also held in place on ascending or
descending gradients even if the electric park-
ing brake is not engaged.
5060_003-085
21
1
2
Operation
4
Driving
20156368011531 EN - 01/2021 - 05
To Next Page
