Other conditions that will cause the truck con-
trol unit to deactivate the cruise control func-
tion are:
●
Vacating the driver's seat
●
Truck speed less than 2.5 km/h.
●
Speed limit set to less than 4.5 km/h.
●
The truck control unit detects abnormalities,
e.g. battery door open, battery carrier not
retracted.
If the accelerator pedal is actuated in these
circumstances, the truck is initially braked via
the drive unit. The following message appear
on the display:
Release the accelerator pedal
The truck will continue to drive only when the
accelerator pedal is released and then actu-
ated again.
If these conditions have changed again, the
speed that was initially saved is set again.
NOTE
If the truck is configured with automatic func-
tions to reduce the driving speed and the driv-
ing speed is reduced to 6 km/h or less, the
cruise control function is automatically deacti-
vated.
Operation
4
Driving
224 56368011531 EN - 01/2021 - 05
To Next Page
