Still 6219 - Page 295

Determining the total actual weight
– Park the truck securely and switch it off.
– Determine the unit weights by reading the
truck nameplate and, if necessary, the
nameplate on the attachment (variant)
and/or by weighing the load to be lifted.
– Add together the determined unit weights to
obtain the total actual weight of the truck:
Net weight (1)
+ Max. permissible battery weight (2)
+ Ballast weight (variant) (3)
+ Net weight of attachment (variant)
+ Weight of the load to be lifted
+ 100 kg allowance for driver
= Total actual weight
– Drive the truck into the lift with the forks fac-
ing forwards. Make sure not to touch the
shaft walls.
– Park the truck securely in the lift and switch
it off to prevent uncontrolled movements of
the load or the truck.
1
2
3

Operation
4
Handling loads
27956368011531 EN - 01/2021 - 05