– Keep the battery door open during charg-
ing.
– Do not place any metal objects on the bat-
tery.
– Fully open any protective structures (e.g.
fabric-covered cab).
– Have fire extinguishing equipment ready.
Lifting accessories
DANGER
Risk of accident!
The battery may fall from the lifting accessory. The
lifting accessory may tip over and be damaged. If this
happens, there is a risk to life and limb.
The battery must be removed only when the truck is
on level, even ground with sufficient load capacity.
The load capacity of the lifting accessory used (see
operating instructions or nameplate) must at least
match the battery weight (see battery identification
plate).
– Check the load capacity of the lifting accessory.
– Remove the battery on suitable ground.
Battery weight and dimensions
DANGER
Risk of tipping due to change in battery weight!
The battery weight and dimensions affect the stability
of the truck. When replacing the battery, the weight
ratios must not be changed. The battery weight must
remain within the weight range specified on the
nameplate.
– Do not remove or change the position of ballast
weights.
– Note the battery weight.
Performing battery maintenance
The cell covers of the battery must be kept dry
and clean. Do not open trays that have been
sealed by the manufacturer.
Terminals and cable shoes must be clean,
lightly coated with battery grease and screwed
on tightly.
– Neutralise any spilt battery acid immediate-
ly.
Operation
4
Handling the lead-acid battery
396 56368011531 EN - 01/2021 - 05
To Next Page
