CAUTION
Abrasive cleaning materials can damage the surfa-
ces of components!
Using abrasive cleaning materials that are unsuitable
for plastics can cause plastic parts to dissolve or be-
come brittle. The screen on the display-operating unit
could become cloudy.
– Strictly adhere to the following steps.
– Park the truck safely and switch it off.
– Disconnect the battery male connector.
– Do not spray electric motors and other elec-
trical components or their covers directly
with water.
–
Do not
use high-pressure cleaning equip-
ment.
– Do not aim the cleaning jet directly at adhe-
sive labels or decal information.
– Remove all deposits and accumulations of
foreign materials in the vicinity of hot com-
ponents.
– Use only non-flammable fluids for cleaning.
– Observe the manufacturer's guidelines for
working with cleaning materials.
– Clean plastics only with cleaning materials
intended for plastics.
– Observe the manufacturer's guidelines for
working with cleaning materials.
– Clean the truck exterior using water-soluble
cleaning materials and water. Cleaning with
a water jet, a sponge or a cloth is recom-
mended.
– Clean all accessible areas.
– Before lubrication, clean the oil filling open-
ings and the area around the oil filling open-
ings, as well as the lubricating nipples.
Operation
4
Cleaning the truck
42756368011531 EN - 01/2021 - 05
To Next Page
Loading...
