Stratasys Objet260 Connex - Page 110

Using Objet Studio
5–72 DOC-06810 Rev. A
Jobs Queue Onthe server,the JobsQueue liststhelast15jobssentfromclientcomputers.
Onclientworkstations,the
JobsQueue listsjobssentfromthatcomputerto
theprinterserver.
Informationforeachofthequeuedjobsisdisplayed,includingthejobstatus.
Inaddition,thefollowinginformationisdisplayed:
• Owner—thecomputerthatsentthejob
• BuildTime—theestimatedbuildingtimeforthejob
• ModelConsumption—theamountofmodelmaterialrequiredto
completethejob,andtheamountactuallyusedtillnow
• SupportConsumption—theamountofsupportmaterialrequiredto
completethejob,andtheamountactuallyusedtillnow
• PrintingMode—HS=HighSpeed,HQ=HighQuality,DM=Digital
Material
Printing Progress
The Time panelshowsprintingtimesandthenumberofslicessenttotheprinter.
History TheHistorypanelshowsinformationforthelast50jobsandtheirfinal
status.YoucandragajobfromHistorytoJobsQueuetoprintthetrayagain.
Available
Resources
TheAvailableResourcespanelcontainsgraphicindicatorsthatshowthe
amountofavailableprintingmaterialsremainingintheprinter.
*

Material
Consumption
• Actual—theamountofmaterialusedtillnow
• Required—theamountofmaterialstillneededtofinishthejob
Tray Preview TheTrayPreviewpaneldisplaysthebuildtrayviewofthejobselectedinthe
JobQueueortheHistorylist.
Onaserver,youcanopenanenlargedpreviewwindowbyclickingonthe
TrayPreviewdisplay(see“Extended
TrayPreview”onpage 81).
Waste IfyoumovethemouseovertheWastedisplay,theamountofwasteinthe
containerisdisplayed.
Status Meaning
Waiting Printingofthisjobhasnotstarted.
Building P rintingofthisjobisinprogress.
Stopped Printingofthisjobwasinterrupted.Printingcanlaterbe
continued(Resume)orbegunagain(Restart).
Error Errorsoccurredduringtheprintingofthisjob,anditwas
placedintheJobsQueueagain.
Editing Thisjobisnow
beingeditedinObjetStudio.
Spooling Thejobfileisbeingspooledintheprinter.
Preprocessing
The3Dprinterisreadyingitselfforprinting:thecover
locks,printheadswarmupandareputinstartingposition,
UVlamp
s  are turnedon,andthebuildtraylevelis
adjusted.
OnSchedule Thejobisscheduledtobeprintedataspecifiedtime.
*ObjetStudiodisplaystheweightoftheprintingmaterialsinbothcartridges
aslongaseachcartridgecontainsmorethan100gramsofmaterial.The
weightunder100gramsisnotcalculatedanddisplayed.However,ifa
cartridgecontainslessthan100gramsofmaterial,theprinterusesit—as
longas
thematerialintheothercartridgeweighsmorethan100grams.In 
anycase,theweightofeachcartridgeisdisplayedintheprinterapplication.