GTS Technical Manual
9. April 2021 Edition: V1.00/2021 6-17
Copyright © 2020, Diversey
06.18.30 electronics - connections - 2100µicro_4000_5000_3500µicro_V2.00.fm
23 X40 Dig. Input (Throttle micro switch) 6 DIG_EIN_1B
23 X40 Dig. Input (Reserve 1) 7 DIG_EIN_2B, (TASKI AERO 3500µicro =>
Hand tool)
23 X40 Dig. Input (Reserve 2) 8 DIG_EIN_3B, (TASKI AERO 3500µicro =>
Pressure switch)
23 X40 Dig. Input (Reserve 3) 9 DIG_EIN_4B, (TASKI AERO 3500µicro =>
Temperature switch)
23 X40 n.c. 10 Not connected
24 X43 Brush pres. (Signal brush lowering drive) 1 Plus (+) 5VDC
24 X43 Brush pres. (Signal brush lowering drive) 2 GND
24 X43 Brush pres. (Signal brush lowering drive) 3 Not connected
24 X43 Brush pres. (Signal brush lowering drive) 4 Not connected
24 X43 Brush pres. (Signal brush lowering drive) 5 Output (Signal)
24 X43 Brush pres. (Signal brush lowering drive) 6 Not connected
25 X42 Steering (Hall sensor steering angle) 1 Plus (+) 5VDC
25 X42 Steering (Hall sensor steering angle) 2 GND
25 X42 Steering (Hall sensor steering angle) 3 Not connected
25 X42 Steering (Hall sensor steering angle) 4 Output (Signal)
25 X42 Steering (Hall sensor steering angle) 5 Not connected
25 X42 Steering (Hall sensor steering angle) 6 Not connected
26 X41 Throttle (Hall sensor throttle) 1 Plus (+) 5VDC
26 X41 Throttle (Hall sensor throttle) 2 GND
Pos. Plug Description [plug] Pin Description [pin]
Table 2: Electronics connections
To Next Page
Loading...
