10.1.2.1
Positioning on the Receipt
To position the texts on the receipt the X and Y positions must be defined
first. This position is then used as the reference point for all other
definitions.
As the first step, check the setting for the spacing. For a standard
delivery receipt definition the spacing should always be set to 1
character.
The entry is confirmed with <Print>.
Next, the columns for the actual printout are defined. This specifies how
much space is to be maintained at the left margin of the page.
The figure for the lines before printout gives the distance to the upper
page margin. No text is printed in this section.
See chapter 10 "Form Description" / page 195.
When the menu 3.4.4 "Receipt Layout" is selected, the receipt header
coded "0" appears. In future you will be able to define various receipts,
currently only the standard receipt is defined. This setting cannot be
changed.
Use the <F3> key "= = >" to display the first defined form element.
The various form elements are displayed in the same order as they are
printed on the receipt.
To Next Page
Loading...
