The length of the placeholder always determines the minimum space
to be reserved. If the output requires more space, the setting is ignored.
The actual value is always placed aligned to the right in the reserved
area.
10.1.3.3
Options
One character or a number of characters also indicate the option of when
the text is to be printed. The text is only printed if the selected conditions
are also fulfilled after the printing job is triggered.
The following abbreviated designations are defined:
L/D Delivery note
R/I Invoice
K/C Copy
N/Z Zero receipt
V Electronic seal verified
X Electronic seal (soft seal) broken
P Product transfer between single compartments of a truck
S Self-loading
W Only available for the product block!
Adds the product weight to the product information.
Example:
•
'LK': The text with this option is only printed on copies of delivery
notes.
•
'X': A text with this option is only printed when the electronic seal
is broken.
Option “K” is not supported by document elements 69 – 73.
10.1.3.4
Attributes
A range of attributes are made available to the user for individual receipt
layout. The selection of the available attributes is limited here by the
possibilities offered by the printer used.
The effect of the various attributes can be seen in the summary (chapter
10.1.3 " Summary of Text Modules " / page 200) or in a sample receipt
(chapter 10.1.4 " Control Printout " / page 209).
To Next Page
Loading...
