TechnipFMC Sening MultiFlow - Page 208

MN F09 002 US  DOK-383E  Issue/Rev. 3.62
(02/13)
MultiFlow  Form Description
212
Sening® is a registered trademark of FMC Technologies
(341) Spacing
: Characters
(342) Columns before printing : 0
(343) Lines before printing : 0
(344) Form descr.
Y
X Attr Opt
------------------------------------------
Receipt printout in descriptive form:
The descriptive text and the code (in brackets) state the text modules
used (see "Description of Text Modules" / p. 202).
 Special formatting, e.g. double height, bold, underlining, etc. are specified
under Attr (refer to " Sum Blocks " / p. 209). See also the effect of the
attributes on the printout of the receipt summary.
 If nothing is specified under Opt, then the defined text appears on the
invoice and on the delivery note (refer to "Attributes" / p. 206). If option
'D' is entered, then a printout only occurs on the delivery note, whereas
for option 'I' the printout correspondingly only occurs on the invoice. The
option 'C' only applies to copies, i.e. the text is only printed out for a copy.
 In the module summary (see " Summary of Text Modules " / p. 200) the
standard attributes and options for the printout are already specified. If
the text "Invoice", for example, is specified with double height, double
width and as option 'I', the printout only occurs on an invoice.
Standard receipt
( 0)
0
0
RECEIPT TITLE
( 20)
0
0
DW
COPY
( 25)
2
8
B
K
Meter ID :#20#
( 2)
3
0
Receipt ID :#20#
( 3)
4
0
Deliv. Date :#20#
( 8)
5
0
Deliv. Start :#20#
( 9)
6
0
Deliv. End :#20#
( 10)
7
0
Customer ID :#20#
( 4)
8
0
PRODUCT BLOCK 1
( 11)
10
0
D
TOTAL BLOCK
( 14)
14
5
D
R
------------------
( 1)
25
8
Signature
( 1)
26
11
You've been served
( 1)
30
0
by: #15#
( 18)
31
0
(X-Position) Clumn
Line
(Y-Position)