Add Measurements menu fields and controls
Field or control Description
Measurement tabs The tabs organize measurements by their type. The Measurement tab is the default set of Amplitude
and T
ime measurements that are built in to the instrument.
Measurement description
(graphic and text)
Shows a graphic and short description of the selected measurement. Use this information to verify that
the selected measurement is correct for what you want to measure.
Source Selects the measurement source. If the measurement requires more than one source (for example,
Skew, Phase, or many Power measurements), the menu shows two source fields from which to select.
Add button Adds the selected measurement as a measurement badge to the Results bar. You can also double-tap
a listed measurement to add it to the Results bar.
Measurement panels
Panel Description
Amplitude Measurements
panel
Tap the panel bar to list the available amplitude measurements. Touch and drag the list to scroll
through all measurements.
See Amplitude Measurements panel on page 107.
Time Measurements panel Tap the panel bar to list the available time measurements. Touch and drag the list to scroll through all
measurements. See Time Measurements panel on page 109.
The Standard measurements tab
The tab lists the default set of amplitude
and Time measurements that are included with the instrument.
To open the tab, tap the Measure button.
To add a measurement to the Results bar:
1. Select the signal source.
2. Tap a measurement panel:
Amplitude Measurements panel on page 107
Time Measurements panel on page 109
3. Select a measurement. If a measurement requires two signal sources, select the sources in the Source 1 and Source 2 fields.
4. Tap Add. You can also double-tap a measurement to add it immediately to the Results bar.
Amplitude Measurements panel
The Amplitude Measurements panel lists available amplitude-related measurements that you can take on analog channel signals, math
waveforms (time-domain), and reference waveforms. Amplitude measurements are not available for digital signals.
To open the Amplitude Measurements panel:
1. Tap Measure button.
2. Tap the Amplitude Measurements panel.
To add a measurement to the Results bar:
1. Select the signal source.
2. Select a measurement.
3. Tap Add. You can also double-tap a measurement to add it immediately to the Results bar.
Menus and dialog boxes
2 Series MSO MSO24 and MSO22 107
To Next Page
Loading...
