4. T
ap the Waveform Intensity field and use the multipurpose knob to set the brightness of all waveforms.
Set the graticule style and intensity
Use this procedure to set the graticule (display grid) style and intensity.
1. Double-tap on an open graticule area to open the Waveform View configuration menu.
2. Tap the Graticule Style field to select a graticule style from the list.
• Grid provides a grid, cross hairs, and frame on the instrument display.
• Time provides a vertical grid of time marks, cross hairs, and frame on the instrument display.
• Full shows a frame and a grid on the instrument display. This style is useful for making quick, full-screen measurements with
cursors and automatic readouts when cross hairs are not needed.
• None provides a frame without a grid and cross hairs.
3. Tap the Graticule Intensity field and use the multipurpose knob to set the brightness of all graticules.
Note: Changing the graticule intensity also changes the intensity of vertical scale readouts and horizontal time readouts on
the screen. Graticule intensity does not change the intensity of callout text on the screen.
Setting waveform display parameters
88
To Next Page
Loading...
