Field or control Description
Use the arrow buttons to navigate the file directory.
The left arrow navigates back to the previously visited folder
.
The Right arrow navigates forward to the previously visited folder.
The Up arrow navigates up one level from the current folder.
Use to create a new directory (folder) at the current location. Opens the new directory after it is
created.
Copy Copies the selected file in the filename pane to memory. You can copy the Tek files or folders from
local/network/USB drives or from T
ekDrive file storage location.
Paste Pastes the file from the last Copy action in the current File Utilities session into the current location.
You can paste the Tek files or folders to the chosen file target location. The target locations are
local/network/USB drives or TekDrive file storage location as well.
Delete Deletes the selected file or folder.
Rename Renames the selected file or folder.
Unmount Unmount the selected drive. Select the drive letter and tap Unmount.
For USB drives, Unmount closes the file writing session on the attached USB device to let you
disconnect the device from the USB port. The device is also removed from the Drive column of menus
that can access drives.
For network drives, Unmount removes the network drive connection information from the instrument.
The network drive is also removed from the Drive column of menus that can access drives.
For TekDrive, Unmount removes the TekDrive connection information from the instrument. The
TekDrive is also removed from the Drive column of menus that can access drives.
Mount Drive configuration menu
Use this menu to connect to a network or T
ekDrive. The network menu applies to base instrument only (instrument that do not have the
Windows 10 OS SSD option installed) and TekDrive menu applies to all the platforms.
To open the Mount Drive menu:
1. Select File > File Utilities from the Menu bar.
2. Tap Mount to open the Mount Drive menu.
Mount Drive configuration menu fields and controls
Field or control Description
Drive Type Select the required drive to mount on your instrument.
•
Network
• TekDrive
Network
Drive Letter Shows the current list of available (unassigned) drive letters. Tap on the list and select a drive letter to
assign to the network drive.
Table continued…
Menus and dialog boxes
186
To Next Page
Loading...
