Tektronix MSO 2 Series - Control Loop Response (Bode) Plot Configuration Menu

Save As configuration menu (plot Save panel, Save Plot Data button) fields and controls
Field or control Description
Save Location Lists the location where the file will be saved. The default value is the last location to which a file was
saved.
T
ap on the file path and use a keyboard to enter a new save location. Or double-tap on the file name to
open the virtual keyboard and enter a path.
Tap the down arrow icon on the right end of the field to open a list of recent file save locations for the
current save type.
Browse Opens the Browse Save As Location configuration menu to navigate to and select a location at which
to save the file.
File name The file name assigned to the file. The default value is either the user-entered name used to last save
this file type, or a numeric value calculated by the instrument if this file type has not previously been
saved with a custom file name. The default value is Tek000.
Tap the down arrow on the right edge of the field to display and select from a list of recently-saved file
names.
Tap on the file name and use a keyboard to enter a new file name. Or double-tap on the file name to
open the virtual keyboard and enter a file name.
Cancel Cancels the file save action and closes the configuration menu.
OK Saves the file to the specified location, closes the Save As menu, and displays a confirmation
message.
Control Loop Response (Bode) plot configuration menu
Use this menu to change the settings of a displayed Control Loop Response plot (Control Loop Response measurement).
T
o open the Control Loop Response plot configuration menu, double-tap anywhere in a Control Loop Response plot view.
Settings panel (Control Loop Response plot configuration menu) fields and controls
Field or control Description
AutoScale Toggles AutoScale On or Off. T
urn AutoScale off to manually set the X and Y-axis range and view an
area of interest.
When AutoScale is off, a small Zoom window appears in the plot. Drag the blue vertical bar in the
Zoom window to view that area in the main plot view. Use the Zoom and Pan front panel knobs to
change the zoom area and position.
Gridlines Selects which gridlines to show in the plot. Select the grid style that meets your measurement needs.
Display Vectors draw waveforms with lines between record points.
Dots draw waveform record points as dots on the screen.
Table continued…
Menus and dialog boxes
208