4. Select the type of callout from the drop-down list. The types of callout available are as follow:
Callout Type Description
Note Adds a callout as a text.
Arrow Adds a callout text with an arrow.
Rectangle Adds a callout text with an arrow pointing to a rectangle. The rectangle can be dragged to any position.
Bookmark Adds a callout text with a bookmark added for either Waveform view (ch, math, ref), Spectrum view (freq
domain traces, rf vs time domain traces), or T
ime Trends. Specify the source channel from the drop-down list
and X-position of the callout.
5. T
ap in the Text field and use a keyboard to enter the callout text, or double-tap in the Text field and use the on-screen keyboard to
enter the callout text.
Note: Y
ou can enter only one row of text in the Text field of the Text Settings configuration menu (using an attached
keyboard). You can enter multiple rows using the on-screen keyboard entry field.
6. If you used the on-screen keyboard to enter text, tap the Enter button on the keyboard to close the keyboard and show the callout on
the screen.
7. Use the format menu controls to set font type, size, color and other characteristics. See T
ext Settings configuration for details.
8. T
ap outside the callout Settings configuration menu to close it.
9. To move a callout, touch and drag the callout text to a new position.
Delete a Callout
Tap and hold on a callout text to open a menu to delete that Callout.
1. Touch and hold on the callout text you want to delete (or right-click with the mouse). The oscilloscope opens the right-click menu.
2. Select Delete. The callout is deleted immediately.
Analog channel operating basics
2 Series MSO MSO24 and MSO22 77
To Next Page
Loading...
