A session is a zipped file that contains an instrument setup file and all acquired waveform data. Use session file contents to move analysis
activities to a PC and free up the instrument for others to use.
Field or control Description
File save type Tap the Session
tab to enable saving a session file. Selecting Session sets the file extensions in the
Save As Type field to .tss.
Save As Type A session file can only be saved to format .tss.
Browse Save As Location configuration menu
Use this menu to select a new file location to save files.
T
o access the Browse Save As Location configuration menu:
1. Select File > Save As....
2. In the Save As configuration menu, tap the Browse button.
Browse Save As Location configuration menu fields and controls
Field or control Description
File path field Shows the current directory.
T
ap on the file path and use a keyboard to enter a new path. Or double-tap on the file name to open
the virtual keyboard and enter a path.
Tap the down arrow icon on the right end of the field to open a list of recently accessed file save paths,
for the current save type, up to a maximum of 20 paths.
The Drive column lists the directory structure, opening at the root level. Use to quickly navigate to a
location.
T
ap to list the contents of the directory in the Name pane.
Double-tap an item, or tap the small arrow to the left of the directory, to display the subdirectories
under it. Double-tap again to close that directory structure.
Drag the list up and down to show more entries.
Use the arrow buttons to navigate the file directory.
The left arrow navigates back to the previously visited folder.
The Right arrow navigates forward to the previously visited folder.
The Up arrow navigates up one level from the current folder.
Table continued…
Menus and dialog boxes
184
To Next Page
Loading...
