Zoom in on waveforms
Use the zoom tools to magnify waveforms to view signal details.
T
urn on Zoom mode
Zoom mode lets you look at a portion of your waveform in greater detail. Enable Zoom mode and touch and drag on-screen to select the
area to zoom.
To enable Zoom mode, use one of the following methods:
1. Double-tap the More button and select the Zoom button on the DRAW A BOX menu window. This sets the Draw-a-Box function to
Zoom mode.
Tap the Draw-A-Box Zoom icon button at the up right of the Results Bar, then touch and drag in the W
aveform view to draw a box on
the area of interest. The Zoom mode stays enabled so that you can draw boxes to zoom in different areas of the Zoom Overview, or
draw boxes to further zoom in on the same area.
2. Tap the Zoom icon in the corner of Waveform and Plot views.
3. Zoom overview:
a. T
o use Zoom once enabled, tap the zoom icon touch and draw a box around an area of interest in the Waveform or Plot view to
immediately display the zoomed waveform and the Zoom Overview window.
b. You can draw boxes in the Waveform view, most plots, and the Zoom Overview area.
c. The Zoom mode stays enabled so that you can draw boxes to zoom in different areas of the Zoom Overview, or draw boxes to
further zoom in on the same area.
d. Single-tapping anywhere disables the zoom box draw mode.
e. To exit the zoom display mode, tap the Zoom icon in the corner of Waveform and Plot views.
4. For more information on zoom:
• Zoom mode and Searches on page 96
Zoom in on waveforms
2 Series MSO MSO24 and MSO22 95
To Next Page
Loading...
