Field or control Description
Slow Channel Sets the slow channel characteristics. Tap and select from the available list of slow channel types. The
default value is None.
Display Format Sets the display format for waveforms as Bus or Bus and W
aveform.
Bus sets the waveform view to display just the decoded bus information.
Bus and Waveform sets the waveform view to display both the decoded bus and the source signal
waveforms.
You can also tap on the + symbol on the bus waveform to toggle between showing the bus only or
showing bus and source waveforms.
Decode Format Sets the decode format used to display the bus information. Formats are Hex, Binary, Mixed
Decimal, and Mixed Hex.
Other bus types
Other serial bus types are available as purchasable options. Once purchased and installed, the new bus types are shown in the Bus
T
ype menu. The serial bus options also add corresponding bus trigger capabilities (when supported) to the Trigger menu. See the Bus
configuration menu on page 127 for links to all serial bus configuration menus.
See also
Bus Trigger configuration on page 220
Bus Search configuration menus on page 139
SENT serial bus search configuration menu on page 149
Search configuration menu overview
Use the Search configuration menu to define conditions that you want to mark on a channel or waveform signal.
To open the Search configuration menu, double-tap a Search badge in the results bar.
If there are no Search badges on the Results bar, tap the Search button. A Search badge is added to the Settings bar, and the Search
configuration menu opens to search type of Edge (default).
The search types and settings are similar to their corresponding trigger types (Edge, Pulse Width, Runt, and so on).
You can create multiple searches for the same waveform. Each occurrence of the search condition is marked with a triangle along the top
of the waveform. Marks for each search are shown in a different color.
Use the following links to access information on specific Search settings.
Other search types
Bus Search configuration menus on page 139
Edge Search configuration menu on page 151
Logic search configuration menu on page 152
Pulse Width Search configuration menu on page 154
Rise/Fall Time Search configuration menu on page 156
Runt Search configuration menu on page 157
Menus and dialog boxes
138