Moving waveform and measurement badges
Y
ou can move waveform and measurement badges within their display bars to meet your measurement needs. Simply touch and drag the
badge to a new position.
Moving waveform badges in the Settings Bar
• A waveform badge can only be moved within the Settings Bar.
• Dragging a waveform badge to a new location selects that waveform.
• Dragging a badge to a new location causes the non-selected badges to move slightly to create the position at which to insert the
badge.
• To move a badge to a position that is off screen of the displayed bar badges (scroll buttons are present), drag the badge that you're
moving onto one of the scroll buttons. The badges that are off screen shift onscreen one at a time until you move the badge off of the
scroll button and position it in the displayed badges.
• Changing the order of waveform badges or badge groups also changes the order of displayed waveforms in the Waveform view. The
order of badges or badge groups (left to right) in the Settings bar determines the order of slices in the display (top to bottom).
• Once you have moved any waveform badge (Channel, Math, Ref, Bus) on the Settings bar to a new position, adding a new badge
adds that badge to the right of the existing badges. This differs from the default badge addition action, which listed badges together by
category (Channels, Math, Ref, Bus) and arranged the badges in numerical order within each badge category. To restore the default
badge addition method, tap File > Default Setup and add the waveform badges back onto the Settings bar.
• Changing the order of bus waveform badges changes the order of the tabs in a bus decode Results table.
Moving badges in the measurement Results Bar
• A Measurement or Search badge can only be moved within the Results Bar.
• Dragging a badge to a new location causes the non-selected badges to move to create the position at which to insert the badge.
• Once you have moved any Results badge to a new position, adding a new Measurement or Search badge adds that badge to the
bottom of the Results bar badges.
• To move a badge to a position that is off screen of the displayed bar badges (scroll buttons are present), drag the badge that you're
moving onto one of the scroll buttons. The badges that are off screen shift onscreen one at a time until you move the badge off of the
scroll button and position it in the displayed badges.
• Changing the order of Measurement badges in the Results bar changes the order of measurements shown in a Results table.
• Changing the order of Search badges in the Results Bar changes the order of the tabs shown in a Search Results table.
Badge grouping
You can group signal badges in the Settings bar to display multiple waveforms in a single slice.
Group signal badges in the Settings bar
You can group signal badges in any combination of channel, waveform, math, reference and bus badges to display related waveforms in
the same display slice. Use this feature to group related signals for easier visual comparisons.
To group one or more signal badges, drag a badge onto another badge until the background badge turns red, then release. Repeat to add
other badges to a group. Each group is shown in its own slice as a set of overlaid waveforms.
Getting acquainted with your instrument
2 Series MSO MSO24 and MSO22 43
To Next Page
Loading...
