Tektronix MSO 2 Series - Skew; Time Outside Level Measurement Algorithm

The application calculates this measurement using the following equation:
Where:
T Setup is the setup time.
T Main is the Main input (clock) Mid reference crossing time in the specified direction.
T 2nd is the 2nd input (data) Mid2 reference crossing time in the specified direction.
Skew
Skew is the time between the mid reference level crossing on Source1 to the mid reference level crossing on Source2. The direction of the
edge crossing is configurable.
The application calculates this measurement using the following equation:
Where:
T Skew is the timing skew
.
T Main is the Main input Mid reference crossing time in the configured direction.
T 2nd is the 2nd input Mid2 reference crossing time in the configured direction.
Time Outside Level measurement algorithm
Time Outside Level is the time the signal remains above the high reference level and/or below the low reference level.
Measurement algorithms
264