Tektronix MSO 2 Series - Configure Pattern Editor; Edge Search Configuration Menu

Configure pattern editor
Use the pattern editor keypad to configure the pattern for the data or custom. T
o open the pattern editor, double-tap inside a Data/Custom
field that requires alphanumeric values.
Data Pattern Editor
Table 4: Data Pattern Editor fields and controls
Keys Description
Entry field Sets the Data and hex values (D-XX). D is the data and XX is the hex value which can be 0-9 and A-F.
0-9 and A-F Sets the Hex value.
CLEAR Clears all values from the input entry field.
Bksp Deletes characters to the left of the insert text marker position.
Cancel Cancels all the values from the input entry field.
Enter Cancels all the values from the input entry field.
Custom Pattern Editor
Table 5: Custom Pattern Editor fields and controls
Keys Description
NULL Enters N in the input box.
FCT Enters F in the input box.
EOP Enters EOP in the input box.
EEP Enters EE in the input box.
T-XX Sets the timecode and the hex values (T-XX). T is the Timecode and XX is the hex value which can be
0-9 and A-F
.
D-XX Sets the data and the hex values (T-XX). T is the data and XX is the hex value which can be 0-9 and
A-F.
0-9 and A-F Sets the Hex value.
CLEAR Clears all values from the input entry field.
Bksp Cancels all the values from the input entry field.
Cancel Cancels all the values from the input entry field.
Enter Cancels all the values from the input entry field.
Note: A minimum of two patterns and maximum of eight patterns can be added. Each pattern should be separated by a space.
Edge Search configuration menu
Use the Edge search to mark when the specified edge condition occurs on an analog, digital, math, or reference waveform.
T
o create a new edge search:
1. Tap Search.
2. Set the Search Type to Edge.
Menus and dialog boxes
2 Series MSO MSO24 and MSO22 151