Tektronix MSO 2 Series - Digital Channel Configuration Menu; Horizontal Configuration Menu

Note: Y
ou cannot set a specific time; the time is preset at the factory.
Digital channel configuration menu
Use the digital channel menu to enable individual digital channels, set their thresholds (individually or as a group), and add labels.
T
o open the digital channel configuration menu, double-tap a digital channel badge. You can also double-tap on the digital channel handles
to open the menu.
Digital channel settings fields and controls
Field or control Description
Display Tap to toggle display of the channel On and Off.
Label Enter label text for the overall data channel.
Height Sets the relative height of the digital waveform on the screen.
A
vailable when Waveform View mode is Overlay Display Mode.
D15-D0 Bit Tap to toggle individual channels (bits) On or Off and remove them from the display.
D15-D0 Label Enter label text for individual data channels. The label is shown to the right of the corresponding digital
channel.
D15-D8 or D7-D0 Turn All Off Turns off the digital channel.
Thresholds Use to set all data channels to the same threshold value. Enter a value in the field and tap the button.
Right-click menu
A right click (touch and hold) on the digital waveform handle opens a menu to turn of
f that instrument channel, configure the overall digital
channel settings, or add a label to the digital channel.
See also
Analog channel configuration menu
Horizontal configuration menu
Use Horizontal menu to select the horizontal mode, set horizontal parameters, and enable trigger delay.
To open the Horizontal configuration menu, double-tap the Horizontal badge in the Settings bar.
Horizontal configuration menu fields and controls
Field or control Description
Horizontal Mode Tap to select either Automatic or Manual horizontal mode.
In Automatic mode you can set the Minimum Sample Rate and Horizontal Scale.
In Manual mode you can set the Sample Rate and Record Length. Horizontal Scale is a dependent
variable calculated from the sample rate and record length.
Table continued…
Menus and dialog boxes
2 Series MSO MSO24 and MSO22 167