Field or control Description
Interpolation Select the method to display the record points between sampled points.
Sin(x)/x connects using a Sin(x)/x curve between the computed values. This makes the gain or phase
curve smoother than linear interpolation.
Linear connects between computed points (Gain or Phase value) using a straight-line fit.
Measurement annotations are displayed for Linear mode interpolation only
.
X-Axis (Frequency) Scale Sets the beginning and end scale range to display in the plot for the X-Axis scales.
This is displayed only when AutoScale is off (deselected).
Y-Axis (Gain) Scale Sets the beginning and end scale range to display in the plot for the Y-Axis scales.
This is displayed only when AutoScale is off (deselected).
Y-Axis (Phase) Scale Sets the beginning and end scale range to display in the plot for the Y-Axis scales.
This is displayed only when AutoScale is off (deselected).
Save panel fields and controls
Use the Save panel controls to save the plot image or date to a file for inclusion in reports or further analysis in other applications.
Field or control Description
Save Plot Image Tap to open the Save As menu. Navigate to the location where you want to save the plot image.
Enter a file name in the File Name field. Select the image file format (PNG, BMP
, or JPG).
Tap OK to save the plot image.
Save Plot Data Tap to open the Save As menu. Navigate to the location where you want to save the plot data.
Enter a file name in the File Name field.
Tap OK to save the plot data as a comma-separated values (CSV) file. It saves the selected standard
limits and computed Harmonic values.
Closing a plot view
T
o close (delete) a Plot view, tap the X in the upper right corner of the view.
Deleting the Measurement badge that opened the plot also closes the plot.
Reference waveform configuration menu
Use this menu to configure display settings for a reference waveform.
To open a reference waveform configuration menu, double-tap a Ref badge on the Settings bar.
Reference waveform configuration menu fields and controls
Field or control Description
Display Turns On or Off displaying the waveform.
Table continued…
Menus and dialog boxes
2 Series MSO MSO24 and MSO22 209
To Next Page
Loading...
