7. T
ap the Help icon on the menu title for more information on the menu settings.
8. To stop showing cursors, open the Cursors configuration menu and set Display to Off.
Using Default Setup
Use Default Setup to restore instrument settings to their factory defaults.
1. Press the front panel Default Setup button to return the instrument to its factory default settings (horizontal, vertical, scale, position,
and so on).
2. You can also select File > Default Setup to restore default settings.
Add a callout to a view
Tap the Callout button to add callouts at the default position, but you can relocate it later.
1. Tap the Callout button on the upper right of the results bar. The oscilloscope adds a text placeholder with default text as Double tap to
edit at the center of the screen. However, you can move it around to place it at your choice.
2. The default callout field wraps text at about 15 characters. Use a mouse to select the callout and select any point from the available 8
touch points to resize the callout field to a larger size, to autowrap the callout text for the longer callout.
3. Double-tap or Double-click on the callout text top to open the callout Settings configuration menu.
Analog channel operating basics
76
To Next Page
Loading...
