Enter Password configuration menu fields and controls
Field or control Description
Password Enter the password. The valid range of characters for the password is from one to 32 characters.
Entering no characters or more than 32 characters results in an error message.
Note: If you cannot use a keyboard because the USB ports are disabled, double-tap on the
password fields to open the virtual keyboard and enter the password.
OK Closes the menu and toggles the selected function's button when the entered password is correct. Any
other conditions result in an error message.
Cancel Closes the menu without taking any action.
Passwords and sending the instrument for service
CAUTION: If you need to send the instrument for service or repair
, make sure to use the Delete Password function in the
Change Password menu before sending to the Tektronix Service Center. Failure to do so may impede servicing the instrument.
See Change Password configuration menu on page 200.
Set Password configuration menu
Use this function to set the password used to access the optional security functions.
T
o access the Set Password configuration menu:
1. Tap Utility in the Menu bar.
2. Tap Security.
3. Tap Set Password.
Set Password menu fields and controls
Field or control Description
New Password Enter the new password in this field. The valid range of characters for the password is from one to 32
characters. Entering no characters or more than 32 characters results in an error message.
Note: If you cannot use a keyboard because the USB ports are disabled, double-tap on the
password fields to open the virtual keyboard and enter the password.
Repeat New Password Re-enter the new password in this field.
Set New Password Sets the new password and closes the menu when the new password matches in both new password
fields and the new password fields are not empty
. Any other conditions result in an error message.
Cancel Closes the menu without taking any action.
Passwords and sending the instrument for service
CAUTION: If you need to send the instrument for service or repair, make sure to use the Delete Password function in the Change
Password menu before sending to the Tektronix Service Center. Failure to do so may impede servicing the instrument.
Menus and dialog boxes
2 Series MSO MSO24 and MSO22 199
To Next Page
Loading...
